排序方式: 共有120条查询结果,搜索用时 15 毫秒
51.
蔡国宏 《中国人民武装警察部队学院学报》2005,21(5):22-23
介绍了红外光谱法在表征阻燃材料与防火涂料结构及研究其阻燃性能方面的应用,讨论了红外光谱分析技术在材料阻燃分析中的应用前景。 相似文献
52.
潘璠 《中国人民武装警察部队学院学报》2005,21(5):68-70
语料库语言学的发展已经使现有的外语教材和语法书中的不足初现端倪,教材编写中的主观性逐渐受到质疑。探讨了语料库研究对外语教材编写的启示,语料库作为教材的直接语料源泉以及将语料库作为检验外语教材的手段等问题,旨在推进对语料库信息的利用,借助语料库技术提高外语教材编写的质量。 相似文献
53.
介绍了阻抗匹配设计原理。自制了三种导电纤维,分别织成正交平纹布,通过优化设计,采用简单层式结构,以酚醛为基体,制备出接近实用水平的多层结构吸波材料。该材料厚3.2mm,密度1.38g/cm3,面密度4.42kg/m2;在8.4GHz~18GHz反射率小于-10dB;弯曲强度173MPa,弯曲模量12.5GPa。 相似文献
54.
吴振坤 《中国人民武装警察部队学院学报》2011,(8):45-48
近年来,我国与建筑外保温系统有关的火灾事故频发,引起了社会对建筑外保温系统及外保温材料防火问题的高度关注。在对常见建筑外保温材料的性能特点及外保温系统的做法进行归纳总结的基础上,分析了相关火灾危险性;针对存在的消防安全问题,从完善法规体系、促进新技术应用、加强政府监管、整治现有火灾隐患以及应急救援准备等方面提出了加强建筑外保温系统消防工作的对策。 相似文献
55.
纳米粒子复合微米粉体雷达波隐身涂层研究 总被引:8,自引:0,他引:8
采用纳米粒子复合微米吸波粉体方法制备雷达隐身吸波涂层,分别选用纳米Sic、铁酸镍钴和金属钴复合微米羰基铁粉和钴粉。对涂层的雷达波反射率测试结果表明,选用纳米复合方式制成的雷达吸波涂层,有利于展宽吸波带宽或降低峰值反射率,其中用纳米钴复合羰基铁粉涂层最为明显,当定义反射率-频率曲线中小于-5 dB以下的频宽为合格吸波带宽时,纳米钴复合羰基铁粉涂层的最低合格吸波频率可以达到4.8 GHz,较没有纳米复合前有明显降低,对提高吸波涂层的低频段吸波性能作用明显,纳米复合技术为提高吸波涂层的低频吸波性能开辟了新的思路。同时实验也表明纳米复合后对原微米吸波剂吸波性能的改变是不确定的,有的还会使吸波性能变差。因此纳米粉体与微米粉体之间的匹配对吸波性能有较大的影响,这种匹配的关系还有待进一步研究。 相似文献
56.
Chang-gui Song Xiao-dong Li Yue Yang Hui-min Liu Ying-xin Tan Jing-yu Wang 《防务技术》2021,17(6):1936-1943
The core-shell 2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane/2,4,6-Trinitrotoluene (CL-20/TNT) composite was prepared by spray-drying method in which sensitive high energy explosive (CL-20) was coated with insensitive explosive (TNT). The structure and properties of different formulations of CL-20/TNT composite and CL-20/TNT mixture were characterized by scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Laser particle size analyzer, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), differential scanning calorimetry (DSC), impact sensitivity test and detonation performance. The results of SEM, TEM, XPS and XRD show that ϵ-CL-20 particles are coated by TNT. When the ratio of CL-20/TNT is 75/25, core-shell structure is well formed, and thickness of the shell is about 20–30 nm. And the analysis of heat and impact show that with the increase of TNT content, the TNT coating on the core-shell composite material can not only catalyze the thermal decomposition of core material (CL-20), but also greatly reduce the impact sensitivity. Compared with the CL-20/TNT mixture (75/25) at the same ratio, the characteristic drop height of core-shell CL-20/TNT composite (75/25) increased by 47.6% and the TNT coating can accelerate the nuclear decomposition in the CL-20/TNT composites. Therefore, the preparation of the core-shell composites can be regarded as a unique means, by which the composites are characterized by controllable decomposition rate, high energy and excellent mechanical sensitivity and could be applied to propellants and other fields. 相似文献
57.
Ian G.Crouch 《防务技术》2021,17(6):1887-1894
The ballistic performance, and behaviour, of an armour system is governed by two major sets of variables, geometrical and material. Of these, the consistency of performance, especially against small arms ammunition, will depend upon the consistency of the properties of the constituent materials. In a body armour system for example, fibre diameter, areal density of woven fabric, and bulk density of ceramic are examples of critical parameters and monitoring such parameters will form the backbone of associated quality control procedures. What is often overlooked, because it can fall into the User’s domain, are the interfaces that exist between the various products; the carrier, the Soft Armour Insert (SAI), and the one or two hard armour plates (HAP1 and HAP2). This is especially true if the various products are sourced from different suppliers.There are between 30 and 150 individual layers within a typical body armour system, and each of the interfaces between each of those layers will, in some way or another, contribute to the ballistic performance of the system. For example, consider the following interfaces/interlayers: (i) the frictional, sliding, inter-ply surfaces within a soft armour pack, and also between the pack and the carrier, (ii) the air-gaps that may develop within the soft armour pack, (iii) the interconnecting space between the soft armour pack and the hard armour plate, (iv) the nature of the interfaces between adjacent plies of a multiplied backing laminate, even in a highly compressed Ultra High Molecular Weight Polyethylene (UHMWPE) variant, (v) the interlayer between the ceramic and its substrate, within a HAP, and (vi) the geometrical fit between two hard armour plates within a stacked body armour system. This paper will provide a User-friendly overview of all such interfaces and provide unique guidance as to their criticality and influence. 相似文献
58.
综述了隐身材料的现状和发展趋势,包括雷达隐身材料、光电隐身材料、声隐身材料和降磁材料,并介绍了几种有发展前途的新型隐身材料. 相似文献
59.
抗电磁干扰高分子材料的研究与应用 总被引:4,自引:0,他引:4
杜仕国 《军械工程学院学报》1995,(3)
通过对电磁波干扰的现象分析,阐述了屏蔽作用原理及屏蔽方法,研究了表面导电材料和导电复合材料等抗电磁干扰高分子材料的性能、工艺及其屏蔽效果,并对它们的应用与发展前景进行了讨论。 相似文献
60.
文中论述了运用微型计算机(IBM-PC)进行复合材料强度准则研究的方法,包括强度包络线绘制、双向加载数据采集及实验数据处理等,同时还研究了如何确定双向试验中的破坏载荷值,并在分析实例中提供了较详细的数据。 相似文献